16
•
To check the rubber hose for leaks, use soapy water: if no bubbles
form, there are no leaks.
•
Warning: do not use flames to check for gas leaks!
USE OF THE PRODUCT
:
1.
Lightly press the tap of the burner you want to light and turn it
anticlockwise.
2.
Bring a flame close to the burner.
3.
Wait until it is completely lit and turn the knob to adjust the
intensity of the flame.
4.
To turn off the burner, turn the knob clockwise to OFF.
5.
After use or before storing the product, turn off the stove by first
closing the valve on the bottle. This will burn all the gas, and the
rubber tube will remain completely empty. At this point it is also
possible to close the stove tap.
6.
Wait until the stove is completely cold, at least 30 minutes
.
CLEANING AND MAINTENANCE
:
•
Clean the stove regularly between uses, especially after a
long period of inactivity.
•
Before cleaning, make sure the stove is completely cold.
•
Make sure the valve on the cylinder and the burner knobs
are closed (OFF position). Remove the grill for easier
cleaning.
•
Use a damp sponge to remove any food encrustations. For
