MEITRACK T400G TPMS Scheme User Guide
Copyright © 2019 Meitrack Group All rights reserved. - 5 -
1
Copyright and Disclaimer
Copyright © 2019 MEITRACK. All rights reserved.
,
and
are trademarks that belong to Meitrack Group and its subsidiary.
The user manual may be changed without notice.
Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for
any purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying
and recording.
Meitrack Group shall not be liable for direct, indirect, special, incidental, or consequential damages (including but
not limited to economic losses, personal injuries, and loss of assets and property) caused by the use, inability, or
illegality to use the product or documentation.
2
Product Introduction
2.1
Product Overview
High land surface temperature and ambient temperature could be one of the causes of a flat tire. When a tire is
abnormal, if drivers know the tire's condition in advance, they can take measures in a timely manner, thus preventing
accidents.
The T400G tire pressure monitoring system (TPMS) scheme is designed to monitor vehicle tires in real time and
provide an early warning for any form of abnormal conditions. After the tire pressure sensor is installed on the
position where tire's valve stem locates, tire pressure and temperature data will be sent to the tracker via the wireless
transmitter. These data can be obtained from the MS03 web platform or MS03 app. When the tire pressure is too
low or a tire leaks air, an alert will be automatically sent.
2.2
T400G Scheme Diagram
