MEITRACK T400G TPMS Scheme User Guide
Copyright © 2019 Meitrack Group All rights reserved. - 20 -
As shown in the above figure, all the high pressure thresholds are set to 12 bar, all the low pressure thresholds are
set to 9 bar, and the high temperature threshold is set to 70°C.
Note: If you use Meitrack Manager to configure tire pressure sensors, you must connect the tracker to a computer
by USB cable. If you use the MS03 platform, you must ensure that the tracker is online. However, the two
configuration methods are nearly the same.
6.2
Setting the Tire Pressure Unit
The MS03 platform supports two tire pressure units: BAR and PSI. You can set the tire pressure unit on the
System
settings
page, as shown in the following figure.
Note: After the tire pressure unit is set, this setting will take effect on configuration pages and report pages.
