MEITRACK T399G Vehicle Tracker User Guide
Copyright © 2018 Meitrack Group All rights reserved. - 9 -
in arming
state
device will dial the authorized phone numbers in
sequence and send a vehicle theft alert by SMS or
GPRS. The buzzer will make sounds for five
consecutive minutes. During this period, you can
disable the arming state and then the buzzer will stop
buzzing.
Note:
1.
To implement the fuel/power cut-off function for a vehicle theft alert, you should select the vehicle theft event
in the Output 1 column on the Meitrack Manager software.
2.
To implement the alert function of the buzzer, you should set the 1-Wire interface (green cable) to alert output.
2.1.9
Starting the Engine by RFID/iButton
After swiping the authorized RFID card or the authorized iButton key touches the iButton reader, the driver must
start the engine within 1 minute. Otherwise, the tracker's output 1 will be triggered (engine cut-off), and thus the
driver cannot start the vehicle. At the moment, if you want to start the engine, you must swipe the iButton key/RFID
card again.
Before starting the engine, ensure that:
1.
The tracker's input 2 is connected to the engine detection cable.
2.
An iButton key or RFID card has been authorized.
3.
The tracker's output 1 is connected to the engine control cable through a relay.
4.
The RFID ignition function has been enabled by Meitrack Manager or MS03 tracking platform.
5.
The RFID event has been enabled on Meitrack Manager.
3
Product Functions and Specifications
3.1
Product Functions
3.1.1
Position Tracking
GPS + LBS positioning
Real-time location query
Tracking by time interval
Tracking by distance
Tracking by mobile phone
Speeding alert
Cornering report
3.1.2
Anti-Theft
Polygonal geo-fence alert
Engine or vehicle door status alert
Remote vehicle fuel/power cut-off
GPS blind spot alert
Towing alert
