MEITRACK T399G Vehicle Tracker User Guide
Copyright © 2018 Meitrack Group All rights reserved. - 23 -
8.1.3
Setting Code Matching of the RF Remote Control
After the cover of the remote control receiver is removed, there will be a purple cable, as shown in the following
figures.
Remove the cover
Cable Color
Description
Yellow
Connect to 5 V power supply.
Black
GND
Green
Remote control output cable
Connect to input 1 (grey cable), which needs to be set to the remote control input.
Purple
Cable for code matching
Perform the following steps to set code matching:
1.
Connect the remote control receiver's yellow cable to 5 V power supply and code matching cable (purple) to
GND for more than 2 seconds.
2.
Press any key of the remote control, and then press any key of the other remote control.
3.
Release the code matching cable of the remote control receiver.
4.
Enable the SMS/GPRS events of arming and disarming, and use the remote control to set arming or disarming.
If an SMS or GPRS event is received, the code matching is set successfully.
Definitions of RF Remote Control Keys:
Arm key
Disarm key
Function Key
Vehicle State
Operation
Description
1: Arm key
Disarming
state
Press once
The buzzer will make a sound, indicating that the device is in
arming state. In this way, if input 1 (vehicle door), input 2 (ACC)
or a towing event is triggered, a vehicle theft alert (event 58)
will be generated by SMS or GPRS and the device will dial the
authorized phone numbers in sequence.
