MEITRACK Ultrasonic Fuel Level Sensor User Guide
Copyright © 2022 Meitrack Group All rights reserved. - 9 -
4) Please scan the QR code with Android phone, download and install the APP.
A76-100\A76-250
ASUF105
Note: The WiFi tool is only used to locate the installation position and can be reused.
5.
Locate the installation position
Clean up the couplant on the fuel tank and probe and keep the probe installation location dry. If the bottom of the fuel
tank is covered with paint, use the putty knife or screwdriver to scrape paint. Then use the sandpaper to polish the
installation location until the tank metal is exposed.
Put the couplant (pea size) on the surface of the senor (the side without the label).
Hold the sensor on the installation area, check the result on your phone. If the result is ok, make a circle mark with the
screwdriver. If not, try another position.