MEITRACK Ultrasonic Fuel Level Sensor User Guide
Copyright © 2022 Meitrack Group All rights reserved. - 5 -
3
Accessories
Standard accessories:
Standard Accessories
Quantity
Picture
Probe (integrated type)
1 pcs
Diameter:
φ33
mm
Height: 12 mm
Wire length: 1m (including the connector)
Protective holder and ring gasket
1 pcs
Fuse
1 pcs
8m extension cable
1 pcs
Wire length: 8m (including the connector)
8 pin to 4 pin conversion cable
1 pcs
rubber pad and 2.5m length steel
clamp (Quantity is selected according
to installation requirements)
Sandpaper
1 pcs
Used to clean the bottom of the fuel tank.
Note: There are two ways to fix the sensor probe, 1. ring steel clamp, 2. strong magnetic AB glue. the
standard for A76-100 and A76-250 is the first one, ASUF105 is the second one. If you choose A76 for fuel tanker, it is
recommended to use the second one, please consult the sales for such case.
Optional accessories:
Optional Accessories
Picture
AB glue (unable to go through logistics, so cannot
provide. Only for reference)
Couplant (unable to go through logistics, so cannot
provide. Only for reference)
