MEITRACK Ultrasonic Fuel Level Sensor User Guide
Copyright © 2022 Meitrack Group All rights reserved. - 10 -
WiFi Tool-APP results
Note: The sensor's sensitivity is high. Hold the probe steady because shaking will make data unstable. If an angle alarm is
generated, park the vehicle on level ground before installing the probe.
6.
Install the sensor
After locate the installation position, please clear the testing couplant on the surface of fuel tank and sensor completely.
1)
Install the A76-100 or A76-250
Install the protective holder:
Please make sure the center of the holder matches the marked round installation position, also the holder should be
parallel to the vehicle frame (chassis).
Fix the probe
Put the ring gasket on the surface of the sensor, then fill the measuring area with grease, make it a bit higher than the
ring gasket. There must be no air bubbles or dust or sand inside the grease. (If you don't have grease, please use
toothpaste instead.)