Index
Technician settings……………………………………………...…………………………….………….. 32-56
- 3 -
P44 – Soft start in heat – cut-out temperature
P45 – Cool differential band
P46 – Cool differential band offset
P47 – Heat differential band
P48 – Heat differential band offset
P49 – Shift between Cool and Heat in Auto mode
P50 – Shift between Cooling stages
P51 – Shift between Heating stages
P52 – Cool valve proportional band
P53 – Cool proportional low limit
P54 – Cool proportional high limit
P55 – Heat valve proportional band
P56 – Heat proportional low limit
P57 – Heat proportional high limit
P60 – Proportional ON percent
P61 – Proportional OFF percent
P63 – Time on-delay between cooling stages
P64 – Time off-delay between cooling stages
P65 – Fan VFS proportional band in cooling
P66 – Fan VFS proportional band in heating
P67 – Fan VFS Low speed percent in cooling
P68 – Fan VFS Medium speed percent in cooling
P69 – Fan VFS High speed percent in cooling
P70 – Fan VFS Low speed percent in heating
P71 – Fan VFS Medium speed percent in heating
P72 – Fan VFS High speed percent in heating
P74 – VFS Medium speed differential
P75 – VFS High speed differential
P76 – Fan VFS Low limit in cooling
P77 – Fan VFS High limit in cooling
P78 – Fan VFS Low limit in heating
P79 – Fan VFS High limit in heating
P83 – View T2 temperature sensor readings
P84 – View T3 temperature sensor readings
P85 – Deice in cool – cut-in temperature
P86 – Deice in cool – cut-out temperature
P87 – Deice in heat time
P88 – Deice in heat break time
P89 – Deice in heat – cut-in temperature
P90 – Deice in heat – cut-out temperature
P91 – Compressor delay
P98 – Display set point only (hide room temperature)
P99 – One or Two set points
P100 – Enable screen dimming
P101 – Screen dimming delay
P102 – Dimming brightness
P105 – Screen brightness when ON
P107 – Weekly program configuration
P108 – Weekly program - events per day
P109 – Weekly program event configuration
P111 – PIR Sensitivity
P114 – Cool PID Kp
P115 – Heat PID Kp
P116 – Cool PID Ki
P117 – Heat PID Ki
P118 – Cool PID Kd
P119 – Heat PID Kd
P122 – Cool Proportional output threshold time
P123 – Heat Proportional output threshold time
P160 – Minimum compressor ON time
P161 – Minimum compressor OFF time
P170 – Economizer low limit temperature
P186 – Enable/Disable internal PIR
P187 – Display or hide humidity reading
P188 – Room temperature limit for disabling
dehumidification in unoccupied mode
P189 – Dehumidification cycle in unoccupied mode
P190 – Dehumidification break time in unocc. mode
P192 – Temperature set-point for re-heat in
unoccupied mode
P194 – Humidity differential band
P195 – Humidity sensor reading offset
P196 – Dead zone between humidification and
dehumidification
P197 – Humidity set-point
P198 – Not in use
P200 – Restore defaults
Communication MAC Address…..……………………………………..…………………….…………. 57
Alarms and Indications ……..…..……………………………………..…………………….…………. 58
