meitav-tec Haften TRE24-PROG-HC11, Инструкция по установке и эксплуатации, Страница: 15 / 16

15
•
Press the “Select” button again - “PROGRAM 3” and “START”
(flashing) will appear on display.
•
Press the “+” or “-” buttons and adjust the hours, minutes and
temperature, the same way as in PROGRAM 1
•
Press the “Select” button: “PROGRAM 4” and “START” (flashing)
will appear on display.
• Press the “+” or “-” buttons and adjust the hours, minutes
and temperature, the same way as in PROGRAM 1.
•
“SEND” will flash, press the “On/Send” button to send
the information to thermostat.
•
“PROGRAM” (flashing) and “SA” (Saturday) will appear
on display.
•
Set programming for Saturday the same way as
programming MON to FRI.
• “SEND” will flash; press the “On/Send” button to send
the information to thermostat.
•
“PROGRAM” (flashing) and “SU” (Sunday) will appear in
display.
•
Adjust the programming for Sunday the same way as
programming MON to FRI.
• “SEND” will flash; press the “On/Send” button to send
the information to the thermostat.
• The TIMER will flash; using the “+” or “-”
buttons, select TIMER ON or OFF.
•
If you changed between TIMER ON (programmable) or
OFF (non-programmable), “SEND” will flash.
•
Press the “On/Send” button to send the information to
the thermostat.
• If you did not change between them, press the “Select”
button to exit programming.