meitav-tec Haften TRE24-PROG-HC11, Инструкция по установке и эксплуатации, Страница: 12 / 16

12
7.5 Temperature Set Point
In Fan mode and in Cool Mode:
• Press the “+” or “-” buttons -
“COOL” and set-point temperature for cooling will
flash.
•
Using the “+” and “-” buttons, adjust the set-point
temperature for cooling.
• Press the “On/Send” button to send the information to the thermostat.
In Heat Mode:
•
Press the “+” or “-” buttons - “HEAT” and set-point
temperature for heating will flash.
•
Using the “+” and “-” buttons, adjust the set-point
temperature for heating.
• Press the “On/Send” button to send the information to
the thermostat.
In Auto Change-over mode:
•
Press the “+” or “-” buttons - “COOL” and set-point
temperature for cooling will flash.
•
Using the “+” and “-” buttons, adjust the set-point
temperature for cooling.
• Press the “Select” button – “HEAT” and set-point
temperature for heating will flash.
•
Using the “+” and “-” buttons, adjust the set-point
temperature for heating.
•
Press the “Select” button again or Press the
“On/Send” button to send the information to the
thermostat.
The thermostat keeps a minimum differential of at least 1 degree
between Heat set and Cool set (Heat is always less than Cool).