Meister MDS280, Перевод оригинальной инструкции

Страница: 38 / 78

38
the work to be performed.
Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
h
Keep handles and grips dry, clean,
and free from oil and grease.
Slip-
pery handles and grips do not enable
safe handling and control of the
power tool in the event of unexpected
situations.
5 Service
a
Have your power tool serviced by a
qualified repair person using only
identical replacement parts.
This
will ensure that the safety of the
power tool is maintained.
b To avoid hazards, damaged power
leads must be replaced by the manu-
facturer or his customer service rep-
resentative.
Additional safety notes for grinders
and polishers
• Wear a dust-protection mask. Breathing
in dust represents a risk to the operator
and anybody else in the vicinity.
• Wear suitable personal protective
gear. Touching or skin contact with
dust represents a risk to the operator
and anybody else in the vicinity.
Note: When sanding, for example, paint
containing lead, as well as certain types
of wood and metal, it is possible that poi-
sonous dust may be generated. Take
appropriate precautions to prevent opera-
tors and anyone else in the area breath-
ing in dust/coming into contact with dust.
6 – Safety instructions
relating specifically to
the equipment
• Always switch on the device before
introducing it to the workpiece.
• Materials containing asbestos may
not be processed. When working
with any other materials containing
fibres, use dust protection masks and
extraction systems.
• If you wish to use the device out-
doors, ensure it is connected via a
residual current circuit breaker. Exten-
sion cable and plug must be desig-
nated for use outdoors.
• Only use for dry sanding work.
• Breathing in dust from sanding is a
health risk, therefore always work with
the dust extraction function activated.
If necessary, use a mask.
• Do not slow down the abrasive sheet
through resistance.
• Only attach accessories with hook
and eye coatings to the sanding plate.
• The dust extraction openings of the
sand paper and the sanding plate
must match, as far as possible.
• When sanding, do not put excessive
pressure on the machine in order to
prevent the machine from coming to a
standstill.
• Secure the work piece to prevent
it from slipping by using tensioning
mechanisms.
• Make sure that cables always lead
away from the work place.
MW-5456560-Bedien-1908.indd 38 25.09.19 16:12