20
Chapter 4
Cleaning and maintenance
4.1 Shower toilet cleaning
Clean the appliance and wipe out any dirt on a regular basis. If the product is not cleaned regularly,
it can lead to dirt buildup that is difficult to remove. Take care not to flood the appliance connected
to the power supply when cleaning.
Be careful not to allow water or detergent to enter the electrical connector, as this may cause an
electric shock, fire or short circuit.
Do not use abrasive cleaning agents or those containing chlorine or acids.
Follow the instructions of the cleaning agent manufacturer.
Do not mix different cleaning products.
Use a mild soap solution for daily cleaning.
4.2 Spray nozzle cleaning
The spray nozzle and nozzle arm are rinsed automatically before and after each washing
cycle (standard wash / feminine wash). Irrespective of this, clean the spray nozzle manually
and wipe out any dirt on a regular basis, following the instructions below:
A
.
Press and hold the stop button to make sure
that the toilet is in standby mode.
B
.
Press the “manual nozzle cleaning” button.
C
.
The nozzle will extend without activating the
cleaning function. Clean the nozzle manually
with a sponge and/or replace the nozzle tip if
necessary.
D
.
To complete the process, press the “stop”
button so that the nozzle retracts into the
shower system.