12
2. Pairing the remote control with the shower system
B
.
Turn the power supply to the shower toilet on and
wait 15-20 seconds
C
.
Check if the shower toilet responds to the remote
control signals
A
.
Turn the power supply to the shower toilet off, then
press and hold the stop button until the LED on the
remote control starts flashing.
D
.
If remote control and appliance pairing has
failed, the on/off button LED on the side panel
of the appliance will automatically switch off
after 30 seconds. Try again. If the next attempt is
unsuccessful, contact the service.
3. Control knob battery
battery cover
battery
compartment
A
.
Remove the control knob.
B
.
Open the cover and insert the battery with the
positive side upwards. Use CR 2032 3V battery.
C
.
Insert the knob in an appropriate manner, paying attention to the position of the locking tab.
