13
4. Pairing the control knob
If the knob does not work properly, you can pair the control knob with the shower base again,
following the steps below:
LED
A
.
Press the on/off and standard wash buttons on
the appliance at the same time and hold them
until you hear a beep and the LED flashes for 10
seconds.
B
.
When the LED is flashing, press and hold the
knob until you hear the beep again and the side
button LED stops flashing. The appliance has been
synchronized.
5. Starting the shower toilet
A
.
Make sure that the toilet is correctly connected to the power supply.
B
.
Press the “ “ button on
the side panel and make
sure that the LED is on.
on/off
button
C
.
Open the shut-off valve
and check if there is water
flow.
