
8.2 GNSS Antenna for Stationary Installation
The
Multi GNSS Antenna
is an active GNSS antenna which can receive the signals of the GPS, GLONASS,
Galileo and Beidou satellite systems. It is very well suited for stationary installations, operates with a 5V DC
supply voltage provided by the receiver, and has an integrated surge protection.
The antenna cable length can be up to 70 meters if a H155 low-loss coaxial cable is used.
Mounting and Installation of the GNSS/L1 Antenna
Multi GNSS Antenna
free view to the sky!
Type-N female
Type-N male
MEINBERG GNSS
Type SMA male
female
Connection to earth rail
(Protective Earth)
cable diameter ca. 1,5 mm Ø
as short as possible
Figure: Schematic diagram of mounting the Multi GNSS Antenna
WARNING!
Antenna mounting without effective anti-fall protection
Danger to life due to fall!
- Pay attention to effective working safety when installing antennas!
- Never work without an effective anti-fall equipment!
WARNING!
Working on the antenna system during thunderstorms
Danger to life due to electrical shock!
- Do not carry out any work on the antenna system or the antenna cable
if there is a risk of a lightning strike.
- Do not carry out any work on the antenna system if the safety distance
to free lines and sequential circuits is exceeded.
26
Date: 2nd September 2019
LANTIME M300/GNS/RPS