Meinberg IMS-HPS-100, Руководство по установке

Страница: 9 / 14

4 HPS-100: PTP / SyncE / Hardware NTP
Interface
IEEE 1588 v2 compatible
Profiles: IEEE 1588v2 Default Profile
IEEE 1588v1 (option)
Enterprise Profile
IEC 61850-9-3 Power Profile
IEEE C.37.238-2011 Power Profile
IEEE C.37.238-2017 Power Profile
ITU-T G.8265.1 Telecom Frequency Profile
ITU-T G.8275.1 Telecom Phase / Time Profile (full timing support)
ITU-T G.8275.2 Telecom Phase / Time Profile (partial timing support)
SMPTE ST 2059-2 Broadcast Profile
IEEE 802.1AS TSN/AVB Profile
AES67 Media Profile
DOCSIS 3.1
PTP Modes: Multicast/Unicast Layer 2 (IEEE 802.3)
Multicast/Unicast Layer 3 (UDP IPv4/IPv6)
Hybrid Mode
E2E / P2P Delay Mechanism
Up to 128 messages/second per client
NTP Mode: NTP Server mode (8 ns time stamp accuracy)
NTPD Software Service (15,000 req./s)
1588 Clock Mode: 1-Step, 2-Step for both Master and Slave operation
Synchronous Ethernet: Master and Slave Capability
Compliant to ITU-T G.8261, G.8262 and G.8264
Ethernet Synchronization Messaging Channel (ESMC)
Network Protocols: IPv4, IPv6
DHCP, DHCPv6
DSCP
IEEE 802.1q VLAN filtering/tagging
IEEE 802.1p QOS
Ethernet Interface: Combo Port: 1 x 100/1000BASE-T RJ45, 1 x GBIT SFP - Slot
USB Interface: USB 1.1 / USB 2.0 full-speed, Micro USB female connector
Signal Outputs: 2x SMA, TTL (50 Ohm) connectors
configurable signals: 1PPS, 10MHz, 2048kHz
CPU: 825 MHz Cortex A9 Dual Core on SOC
Time Stamp Accuracy: 8 ns
HPS
SYNC
100
Out 2
Out 1
6 Date: 14th November 2019 IMS-HPS-100 Setup Guide