Meinberg IMS-HPS-100, Руководство по установке

Страница: 10 / 14

4 HPS-100: PTP / SyncE / Hardware NTP Interface
LED Indicators
LED St: Init lights blue during initialisation,
off in normal operation mode
LED In: red Error - TSU does not work correctly,
PTP services stopped
yellow No link, but initialized
green link up
red stopped
LED A - LED B: Shows the current State of the TSU
yellow - yellow Listening
green - off
Master Mode
off - green Slave Mode
yellow - off Passiv Mode
off - yellow uncalibrated
red - red stopped
Performance Level Options:
Option Unicast Delay NTP PTPv1 PTP
Clients Req./s Req./s Monitoring
————————————————————————————————————————————-
PL-A 8 1024 1600 NO NO
PL-B 256 32768 51200 NO NO
PL-C 512 65536 102400 YES NO
PL-D 1024 131072 204800 YES YES
PL-E 2048 262144 409600 YES YES
A detailed configuration guide you will find in the corresponding firmware manual of the system. See chapter
"The Web Interface -> Configuration: PTP V2".
IMS-HPS-100 Setup Guide Date: 14th November 2019 7