Meinberg GPS164-LQ/PPFO-3/REL-1/DAHS Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 46

Meinberg GPS164-LQ/PPFO-3/REL-1/DAHS Скачать руководство пользователя страница 15

6.4 Time code outputs

Page 11

6.4.2 Generated Time Codes

The internal time code generator may be congured to produce various pulse width modulated IRIG-B or AFNOR

signals. Codes can be output via the front panel bre optic ports FO1. . . FO3.

a) B002:

100 pps, DCLS signal, no carrier

BCD time-of-year

b) B003:

100 pps, DCLS signal, no carrier

BCD time-of-year, SBS time-of-day

c) B006:

100 pps, DCLS Signal, no carrier

BCD time-of-year, Year

d) B007:

100 pps, DCLS Signal, no carrier

BCD time-of-year, Year, SBS time-of-day

e) AFNOR :

Code according to NFS-87500, 100 pps, wave signal,

1kHz carrier frequency, BCD time-of-year, complete date,

SBS time-of-day, Signal level according to NFS-87500

f) IEEE1344:

Code according to IEEE1344-1995, 100 pps, AM sine wave signal,

1kHz carrier frequency, BCD time-of-year, SBS time-of-day,

IEEE1344 extensions for date, timezone, daylight saving and

leap second in control functions (CF) segment.

(also see table 'Assignment of CF segment in IEEE1344 mode')

g) C37.118:

C37.118(DC) Code acc. C37.118, 100 pps, no carrier, BCD time-of-year,

SBS time-of-day,C37.118 extensions for date, timezone, daylight

saving and leap second in control functions (CF) segment

( also see table `Assignment of CF segment in IEEE1344 mode' but

sign bit of local oset is inverted )

6.4.3 Code generation

In the default mode of operation the IRIG/AFNOR timecode outputs are disabled until the GPS-receiver has been

synchronized after power-up. Due to that the generation of the IRIG-code only starts after synchronization.

If the code must be available immediately after power-up, the software GPSMON32 can be used to enable

the time code output without synchronization of the GPS-receiver by setting the enable ag 'pulses' to 'always'.

In this mode of operation the IRIG-code is not locked to UTC-second until synchronization.

GPS164

Date: 27th January 2016

11

«
...
13
14
15
16
17
...
»

Содержание GPS164-LQ/PPFO-3/REL-1/DAHS















































Отзывы:

Нет отзывов