3 Configuration DCF600HS
The PC should have generated an automatic connection to the clock, select the tab "Connection" on the button
"Force Connection". By activating the button runs the program through possible baud rates and ports.
The tab "COM1" is considered in connection with an version of the DCF600HS - RS485. It should be noted
that, for a RS485 COM 0 is inactive.
Impulse
The program MBGMON has the ability to configure the signal outputs of DCF600HS. Then select the tab
"Pulses". The pulse outputs, pulselength and the serial interface can be configured freely. Confirm your selec-
tion with "Save".
DCF600HS
Date: 24th July 2018
9
