Meilhaus Electronic redlab 1208fs, Руководство пользователя

Страница: 7 / 34

7
Chapter 1
Introducing the RedLab 1208FS
This user's guide contains all of the information you need to connect the RedLab 1208FS to your computer and
to the signals you want to measure.
The RedLab 1208FS is a USB 2.0 full-speed device supported under popular Microsoft
®
Windows
®
operating
systems. It is designed for USB 1.1 ports, and was tested for full compatibility with both USB 1.1 and USB 2.0
ports.
The RedLab 1208FS features eight analog inputs, two 12-bit analog outputs, 16 digital I/O connections, and one
32-bit external event counter. The RedLab 1208FS is powered by the +5 volt USB supply from your computer.
No external power is required.
The analog inputs are software configurable for either eight 11-bit single-ended inputs, or four 12-bit
differential inputs. Sixteen digital I/O lines are independently selectable as input or output in two 8-bit ports.
A 32-bit counter can count TTL pulses. The counter increments when the TTL levels transition from low to
high (rising-edge).
A SYNC (synchronization) input / output line lets you pace the analog input acquisition of one USB module
from the clock output of another.
The RedLab 1208FS is shown in Figure 1. I/O connections are made to the screw terminals located along each
side of the RedLab 1208FS.
Figure 1. RedLab 1208FS