Meiko M-iClean U Скачать руководство пользователя страница 8

Страница: 8 / 64

9763258

8 / 64

3.2

Safety instructions on the machine

The machine has a safety note attached. This is located underneath the front panel.

3.3

Requirements for the personnel

Commissioning, instructions, repairs, maintenance, assembly and installation of or
on MEIKO machines must only be carried out/authorised by MEIKO-authorised ser-
vice partners.

During operation it must be ensured that:

• Only adequately trained and instructed personnel are allowed to work on the

machine.

• Personnel responsibilities for operation, maintenance and repairs must be

clearly defined.

• Any personnel undergoing training are only allowed to work on the machine un-

der the supervision of an experienced person.

The required qualifications for performing specific work at the machine are deter-
mined by MEIKO.

Persons

Trained oper-
ating staff

MEIKO author-
ised company
tradesman

MEIKO author-
ised service
technician

Activity

Installation/assembly



Commissioning



Operation, use



Cleaning



Check safety devices



Troubleshooting



Troubleshooting, mechan-
ical



Troubleshooting, electrical



Maintenance



Repairs



* with training as an electrician

Note

The instructions must be acknowledged in writing.

Qualified staff

, as defined by the operating Instructions, are persons:

• over 14 years of age,
• due to their training, experience and instruction are able to perform the required

activities,

• are authorised to perform the required activities by the person responsible for

safety of the machine,

Содержание M-iClean U

































































Результаты поиска

Содержание M-iClean U

Отзывы:

Похожие инструкции для M-iClean U

Бренды по названию

Популярные бренды

Meiko M-iClean U, Руководство по эксплуатации

Результаты поиска

Содержание M-iClean U

Отзывы:

Похожие инструкции для M-iClean U

Бренды по названию

Популярные бренды