Meiko M-iClean U Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 64

background image

51 / 64

9763258

Warning

Danger to life from electric shock if cover panels are open

If the machine is operated without cover panels, electrified parts are freely accessi-
ble. Contact with these parts can lead to serious injury or death.
• Disconnect the machine from the power supply before opening the cover pan-

els. To do this, turn the local mains switch to

OFF

and ensure that it cannot be

switched back on again.

• Attach all cover panels before placing the machine back in operation.

Warning

Danger of injury due to entry into a danger zone

Unauthorised persons might be in or enter the danger zone during transport, as-
sembly, commissioning, maintenance and repair work. This can lead to injuries.
•  Only qualified persons should perform work at and with the machine.
•  Remove unauthorised persons from the danger zone.
•  Block off danger area and mark it for third parties.
•  Never remove or disable safety devices on the machine.

Caution

Environmental damage due to improper disposal of liquids

Environmentally hazardous liquids (e.g. grease and oils, hydraulic oils, coolants,
cleaning agents containing solvents etc.) may be used during work on and with the
machine. Improper disposal of these liquids can damage the environment.
•  Always capture, store and transport liquids in suitable containers.
•  Never mix liquids.
•  Dispose of liquids properly in accordance with local requirements.

9.1

Maintenance

Note

Maintenance work must only be carried out by an authorised in-house technician or
an authorised service technician.
Cleaning work and changing pre-filter in dishwashers with GiO Module must be car-
ried out by trained operators.

The dishwasher has been designed to keep the need for cleaning, care and mainte-
nance to a minimum.

However, for reliable, safe and long-term function of the machine, and in the interest
of hygiene and cleanliness, correct care and maintenance are necessary.

We recommend concluding a maintenance contract with our subsidiary in order to
ensure a long service life of the dishwasher.

A functional test on all safety systems of the machine is carried out during every reg-
ular maintenance.

• Comply with the maintenance intervals prescribed in these operating instruc-

tions.

• Please note the maintenance instructions for the individual components in

these operating instructions.

• Carefully dispose of any cleaning products that could harm the environment.

«
...
49
50
51
52
53
...
»

Содержание M-iClean U

































































Отзывы:

Нет отзывов

Похожие инструкции для M-iClean U

WF501ANW Trouble Shooting Guide

Бренд: Samsung Страницы: 132

Бренд: Gorenje Страницы: 38

Бренд: Fagor Страницы: 112

Бренд: Indesit Страницы: 24

Бренд: Thermador Страницы: 20

Бренд: Smeg Страницы: 21

Бренд: IFB Страницы: 14

Бренд: Zanussi Electrolux Страницы: 28

Бренд: Indesit Страницы: 24

Бренд: Bradley Страницы: 5

Бренд: Saivod Страницы: 76

Бренд: Kuppersbusch Страницы: 56

Бренд: Philco Страницы: 108

Бренд: Electrolux Страницы: 36

Бренд: Electrolux Страницы: 40

Бренд: Electrolux Страницы: 21

Бренд: Electrolux Страницы: 44

Бренд: Electrolux Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды