Operating instructions Glass-, utensil- and dishwasher
M-iClean U
Product description
9763258
23 / 72
Design and construction subject to change without prior notice!
Thermolabel control
In a way which is similar to A
0
control, machines with Thermolabel control have a
disinfection process which uses moist heat. The dishwasher heats the rinse water to
a higher temperature in order to eliminate germs. The efficacy of the disinfection can
be tested using a measurement strip, the Thermolabel. The measurement strip
changes colour after 4 seconds at 71 °C for a wash item.
• During washing, the tank temperature is heated up to 71° C and maintained at
that temperature.
• The rinsing process runs until the end of the programme cycle time, but at least
until the temperature value is reached. After this comes a pause for draining
and the final rinse.
• Washing at high temperatures and long spells in the wash tank can lead to
glass corrosion and premature wear to decoration.
Thermal disinfection - control
Thermal disinfection works according to the same principle as Thermolabel control,
but other requirements apply:
• The disinfection temperature is
≥
80°
C
, which must be maintained on the
washware for
≥
30
s
.
• During washing, the tank temperature is heated up to 76° C, and the final rinse
temperature is 88 °C.
• The rinsing process runs until the end of the programme cycle time, but at least
until the temperature value and specified stop time are reached. After this
comes a pause for draining, final rinse and a subsequent application time.
Thermolabel and thermal disinfection control offer a disinfection effect that exceeds
the standard, such as for hospitals, care homes, requirements according to the
ÖGSV Guideline.
5.8
Automatic standard functions
5.8.1
Eco mode
During periods of inactivity (pauses), the machine displays a leaf symbol to show
that energy is being saved and components protected.
Active
following
Description
ECO MODE I
60 sec Rinse water temperature reduced.
ECO MODE II
180 min
Rinse and wash water temperatures reduced. Water level in wash
tank adjusted to optimum level.
ECO MODE III
8 h
Boiler is drained. Wash water temperature is reduced. Water level in
wash tank adjusted to optimum level.
ECO MODE IV
14 h Machine is drained and shut down.
