10
1.
FOLDER 1 or FOLDER 2: You need to enter the FOLDER 1 to play the files/tracks previously recorded with
the PDR-1. Enter the FOLDER 2 instead to play files downloaded/transferred fro m a co mputer. To change
between the two folders, you need to press
+
to interchange FOLDER 1 and FOLDER 2.(
○
1
)
2. Playback fro m flash me mory or SD ca rd me mory : Se lect the files you want to playback form internal flash
me mo ry or SD card me mo ry (further e xp lained in the previous chapter
Recor di ng
) (
○
2
)
3. Select the Group and track you want to playback: By pressing
+
or
to select group
number in the range fro m range 1 to 9.(
○
3
) And select the track to playback by press
or
button
in the range fro m 1-99
(
○
4
). The recording fo rmat and sample rate of the track you select will show up on the
LCD display.(
○
5
)
4. Press
to start to playback, the LCD display will show “
”. Press the button during playing to pause,
the LCD display will show “
”.
(
○
7
) Press the same button again to continue playing.
5.
Forwa rd and rewind during p layback: Ho ld on
during playback to re wind the play ing. Hold down
to forward the playing. The t ime d isplay will move quickly according to the position. Release the
button to go back to norma l p layback.
6.
Repeat and Repeat All: Enter the M ENU mode, and set up repeat mode. When select REP, the t rack will be
repeated always. If you select REP All, the device will repeat all the tracks.
Ple ase note that the REP All
func tion only works in FOLDER 2 mode .
The LCD will show REP mode on the LCD d isplay.
(
○
6
)
7.
A-B loop : press
button during playback to define a loop start point (A point), then press the button
again to indicate the loop end point (B point). The music will then play fro m A to B again a nd again loop until
you press the button again to stop.(
○
8
)
8.
The device allo ws you to adjust the volume level of earphone or built -in speaker by press
or
during playback. The adjusting level range is fro m 00 to 20.
VIII. Delete tracks
You can de lete the recording files via co mputer or by the device itself. The following progress is the way to delete
the files with the device: Se lect the trac k you want to de lete, press
+
, the LCD will show “dEL” ,
then you need to press
again, the mach ine will start to delete the track. When the LCD fin ish showing
“dELETE” and the clock return to 00:00:00, means the track is empty and are available for a new recording.
