MEI DH 5012, Руководство пользователя

Страница: 20 / 27

20
During operation the compressor will operate until the desired humidity is reached and then will stop.
The air purifier moves the air around the room ensuring all the air in the room is processed and the
humidity is correctly measured.
LAUNDRY MODE:
When drying clothes it is advised for the dehumidifier to operate continuously with maximum water
extraction until the water tank is full. Set the unit to the Smart mode, and set the desired humidity level
between 35%-50%. 35%. The unit will work until the water tank is full when set to 35%.
TIPS: If a permanent drainage pipe is fitted the unit will not stop operating. Setting the desired humidity to
around 35% is good for laundry mode, a quick drying boost, or in emergencies. It is not recommended for long
normal operation in a domestic or office environment.
FAN:
Only the fan will run and water is not extracted, which when used with filters will purify the air. The UV
light and the Plasma ionizer can also be used in this mode to further improve the air quality.
HUMIDITY SETTING
In SMART mode press the UP and DOWN buttons to select the desired relative
humidity level. The default desired humidity is 55%. When a relative humidity of
35% is selected, the compressor will not stop until the water tank is full.
HUMIDITY INDICATOR MODE
When the appliance is started, the indicator light will turn on automatically. The indicator light
colour will change according to the humidity condition.
Red
–
High
humidity, Relative Humidity ≥ 80%
Blue
–
Comfortable level, 80% > Relative
Humidity ≥ 60%
Green
–
Air is dry, Relative Humidity < 60%
The”Humidity Indicator light” button can be pressed to turn on/off the indicator light.
Note: It can take around 2 minutes after the humidity has changed into a different colour bracket for the
indicator will change the colour.
TIMER
Press the TIMER button to program the timer. When the timer is activated the "TIMER"
light will be illuminated. Before programming the timer, ensure the timer function has not
been activated (the light must be off). The following timer programs are available.