DOCUMENT SUBJECT TO U.S. EXPORT CONTROLS, COMPLIANCE APPROVIAL REQUIRED PRIOR TO DISTRIBUTION
IM4830, Page 15
g Level
mV Output
Limits
10.00
70.7 mVrms
69.64 –
71.76
100.0
707.0 mVrms
696.4 –
717.6
1000.0
7070.0 mVrms
6964 -
7176
8.6
Amplitude Accuracy (S.E. Charge Output)
8.6.1
Connect the “S.E.” Charge Output to the input of the Model 6634B Signal Conditioner. Set the
6634B for: Type = SEPE, Sens = 10.00, FS = 20.0, Mode = g, DC = pK and Filter = Out. Set the
4830 for a frequency of 100.0 Hz, Sens= 10.0 and g = 10.00. Record the displayed g level on the
6634B. Limits 9.8 to 10.2
8.6.2
Re-adjust the 4830A for g = 100 and adjust the 6634B FS to 200. Record the displayed g level.
Limits 98 to 102.
8.6.3
Re-adjust the 4830A for g = 1 and adjust the 6634B FS to 2.00. Record the displayed g level.
Limits 0.98 to 1.02
8.7
Amplitude Accuracy (DIFF Charge Output)
8.7.1
. Connect the “DIFF.” Charge Output to the input of the Model 6634B Signal Conditioner. Set the
6634B for: Type = DIFF, Sens = 10.00, FS = 20.0, Mode = g, DC = pK and Filter = Out. Set the
4830 for a frequency of 100.0 Hz, Sens= 10.0 and g = 10.00. Record the displayed g level on the
6634B. Limits 9.8 to 10.2.
8.7.2
Re-adjust the 4830A for g = 100 and adjust the 6634B FS to 200. Record the displayed g level.
Limits 98 to 102.
8.7.3
Re-adjust the 4830A for g = 1 and adjust the 6634B FS to 2.00. Record the displayed g level.
Limits 0.98 to 1.02.
8.8
A, V, and D (Acceleration, Velocity and Displacement)
8.8.1
Set the 4830A frequency to 61.4 Hz, Sens = 10.0 and g = 10.0. Verify that the following is
displayed: ms^2 = 98.0665 and ips = 10.00.
8.8.2
Re-adjust the frequency to 139.857 Hz. Verify the following display: mils = 10.000
8.8.3
Re-adjust the frequency to 22.289 Hz. Verify the following display: mm = 10.000 (fro Rev D4
firmware verify display reads: Tm = 10000.0).