Meggitt 60-2, Руководство по эксплуатации

Страница: 44 / 62

2nd Ed: Nov 01, 01 4-21
SYS 60-2 POH
4.2.2.2 Altitude Hold (ALT)
Upon reaching the desired or assigned altitude, press and release the
ALT switch. The altitude hold mode will engage at the altitude reached at
the time of engagement. There is typically no need to "lead" the desired
altitude. If there is a difference between the altitude engagement point
and the altimeter, use the appropriate UP/DN modifier switch to make
the necessary altitude correction.
NOTE: While in the altitude mode, 1 second of modifier switch
depression will change the altitude approximately 20 ft., up to a
maximum of 200 feet.
NOTE: If more than 200 feet of altitude correction is necessary,
reengage the VS mode, fly to the desired altitude, and reengage the
ALT mode.
4.2.2.3 Intercepting and Coupling the Glideslope
To arm the automatic glideslope (GS) capture function, the following
conditions must be met:
1. NAV receiver must be tuned to the appropriate frequency.
2. The glideslope signal must be valid; no flag.
3. The autopilot must be in NAV/APR/ ALT modes.
4. The aircraft must be 60% or more below the GS centerline during
the approach to the intercept point, and within 50% needle deviation
of the localizer centerline at the point of intercept, usually the outer
marker.