3
UNIT FEATURES
The following sections introduce the fiber optic adapter’s basic features.
Physical Features
Figure 1 Physical Features
1.
Light source mode enable button.
5.
Visual fault locator mode indication LED. This LED indicates
the VFL mode, continuous, blinking or off.
2.
SC style dual wave length fiber optic output (source)
connector with dust cap in place.
6.
Visual fault locator output connector with dust cap in place.
This universal connector accepts fiber optic connectors with a
2.5 mm ferrule.
3.
Fiber optic output (source) mode indication LED. This
LED is red for 850/1310 nm wave lengths and green
for 1300/1550 nm wave lengths.
7.
Visual fault locater enable button.
4.
SC style fiber optic input (detector) connector with dust
cap in place.
8.
Device Laser Safety and operation label (shown below)
Under no circumstances should a user look directly into the devices optical output connectors. Some
sources produce invisible radiation that can permanently damage an eye.