9
Page 1
1.
Select “Projects” from the “HOME” menu using the navigation keys and press [ENTER].
2.
Select “Create Project” and press [ENTER].
3.
Create a Project Name - Navigate to the project name field and press [ENTER]. Using the editor create a new project name.
When complete navigate to the Save hyperlink and press [ENTER].
4.
Select a Media type- Navigate to the Media field and press [ENTER]. Using the navigation keys highlight the “twisted Pair”
selection and press [ENTER].
5.
Select a Test Limit - Navigate to the test limit field and press [ENTER]. Using the navigation keys highlight the desired test
limit and press [ENTER].
6.
Select a Cable Type - Navigate to the cable field and press [ENTER]. Using the navigation keys highlight the desired cable type
and press [ENTER].
7.
Create a Circuit ID - Navigate to the Circuit ID and press [ENTER]. Refer to the section titled Circuit ID for more
information.
Select a Circuit ID Type - Navigate to the Circuit ID Type and press [ENTER]. Use the navigation keys to select the
desired Circuit ID type and press [ENTER].
Select a Circuit ID Form - Navigate to the Circuit ID Form and press [ENTER]. Use the navigation keys to select the
desired Circuit ID Form and press [ENTER].
To establish or change the start Circuit ID, highlight the Start CID and press [ENTER]. Use the editor to create the
desired circuit ID.
To establish or change the stop Circuit ID, highlight the Stop CID and press [ENTER]. Use the editor to create the
desired circuit ID.
To preview Circuit ID list use the navigation keys and highlight the “Preview Circuit ID” hyperlink and press
[ENTER].Press the BACK key to return.
To save the Circuit ID use the navigation keys to highlight the “Save” hyperlink and press [ENTER].
8.
Select a Location - Navigate to the location field and press [ENTER]. Using the navigation keys highlight the desired storage
location and press [ENTER].
Page 2
Press the right arrow to move to page 2.
9.
Add a Comment – Navigate to the Comment field and press [ENTER]. Using the editor create a comment.
Create a Fiber Optic Project Folder:
Creating a fiber optic project spans three menu windows. The process always begins on page one. Press the right arrow to move to the
next page and the left arrow to move to the previous page.
Page 1
1.
Select “Projects” from the “HOME” menu using the navigation keys and press [ENTER].
2.
Select “Create Project” and press [ENTER].
3.
Create a Project Name - Navigate to the project name field and press [ENTER]. Using the editor create a new project name.
When complete navigate to the Save hyperlink and press [ENTER].
4.
Select a Media type- Navigate to the Media field and press [ENTER]. Using the navigation keys highlight either “Multimode”
or “Singlemode” option and press [ENTER].
5.
Select a Test Limit - Navigate to the test limit field and press [ENTER]. Using the navigation keys highlight the desired test
limit and press [ENTER].
6.
Select a Cable Type - Navigate to the cable field and press [ENTER]. Using the navigation keys highlight the desired cable type
and press [ENTER].
7.
Create a Circuit ID - Navigate to the Circuit ID and press [ENTER]. Refer to the section titled Circuit ID for more
information.
Select a Circuit ID Type - Navigate to the Circuit ID Type and press [ENTER]. Use the navigation keys to select the
desired Circuit ID type and press [ENTER].
Select a Circuit ID Form - Navigate to the Circuit ID Form and press [ENTER]. Use the navigation keys to select the
desired Circuit ID Form and press [ENTER].
To establish or change the start Circuit ID, highlight the Start CID and press [ENTER]. Use the editor to create the
desired circuit ID.
To establish or change the stop Circuit ID, highlight the Stop CID and press [ENTER]. Use the editor to create the
desired circuit ID.
To preview Circuit ID list use the navigation keys and highlight the “Preview Circuit ID” hyperlink and press
[ENTER].Press the BACK key to return.
To save the Circuit ID use the navigation keys to highlight the “Save” hyperlink and press [ENTER].
10.
Select a Location - Navigate to the location field and press [ENTER]. Using the navigation keys highlight the desired storage
location and press [ENTER].
Page 2
Press the right arrow to move to page 2.
11.
Select Secondary Setup (Mode) – Navigate to the secondary setup field and press [ENTER]. Using the navigation keys
highlight the desired mode and press [ENTER].
12.
Select Bi-directional Fiber – Navigate to the bi-directional fiber field and press [ENTER]. Using the navigation keys highlight
the desired mode and press [ENTER].