manualshive.com logo in svg

Megger Programma Sverker 750, Руководство пользователя

Поделиться
Скачать
Megger Programma Sverker 750 Скачать руководство пользователя страница 31

3 2

S V E R K E R   7 5 0 / 7 6 0

P r o g r a m m a   E l e c t r i c   A B

Z P - C D 0 1 E   R 0 5 A

5.5 Test mode

Test mode

<Normal>

This menu option is used to specify the desired type
of time measurement. You have three choices:
Normal, Trip + pulse time and Reclose.

You press the CHG button to access the different
memory options, and then scroll up or down using
the

s

 or 

t

 button.

Menu option Explanation

Normal

Measures time from START to STOP.

Trip + pulse time

Measures time from START to STOP
and also the duration of the trip
pulse.

Reclose: #01 999 s

Sets time for reclosings. Max 49
reclosings. The total time for the
specified number of reclosings can
range from 1 to 999 s.

1.

Press the SEL button to invoke the se-
lected option.

5.6 Injection

Injection

<Maintained>

Here, you select the type of generation. You have
four choices: Maintained, Momentary, Max time
and External Start.

Menu option Explanation

Maintained

Generation continues without any time
limit.

Momentary

Generation continues while start switch
is kept activated.

Max time: 99.9 s

Generation continues throughout a
preset interval that can be set from
00.1 to 99.9 s. IMPORTANT: To change
a numerical value, press the CHG
button one additional time and then
use the arrow buttons.

External Start

Select dry or wet contact and closing or
opening contact for the external signal.
This feature enables you to start two or
more Sverkers simultaneously. The
Sverkers “slaves”can be connected to
the make/break contact on the Sverker
“master” and then be set for external
start. The slaves will start at the same
time as the master (±1 ms).

1.

Press the SEL button to invoke the se-
lected option.

Содержание Programma Sverker 750













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды