Megger DLRO10HD Скачать руководство пользователя | Manualshive

Страница: 29 / 40

background image

www.megger.com

DLRO10HD and DLRO10HDX

25

Maintenance

Maintenance

Routine Inspection

Look for any cracks or other damage to the enclosure, missing ports, etc.

Cleaning

Disconnect the instrument from the Mains Power. Wipe it with a clean cloth slightly damped with water or
Isopropyl alcohol (IPA). Care should be taken near the terminals, the IEC Mains Power and USB sockets.

Allow the instrument to completely dry before it is used.

Instrument Care

The instrument should always be handled with care and not dropped. Always make sure that the instrument is
secured when being transported to prevent mechanical shock.

Test Leads

Leads are silicone insulated and work well in all weather conditions. Always keep the leads in a suitable lead bag
when in storage or transportation.

Regular inspection of leads is recommended to make sure that they are not damaged in any way. Damaged leads
could affect resistance readings and are a safety hazard.

Mains Power Fuse

Always use the correct rated fuse (see

Specifications (page 26)

).

Battery Care

Caution: Batteries are only to be installed or removed by an Authorised Service Centre. Do not attempt
to remove the batteries from this instrument.

To prevent deep battery discharge, the battery should be charged at a minimum of three month intervals

Never attempt to charge the battery below 0 °C (32°F) or above 40 °C (104 °F) ambient

To improve battery life, store the instrument in a cool, dry location

Battery Charge

The battery is charged when Mains Power is connected (unless a test is in progress).

For optimum battery life, charge the battery after each use. A fully discharged battery takes eight hours to
recharge.

The charge level will go from low to full charge in incremental steps and continue as long as Mains Power is
connected (unless a test is in progress). When the battery is fully charged the battery icon will stay steady.

Battery full charge

Battery charge low

Battery discharged: The instrument shuts down automatically.

«
...
27
28
29
30
31
...
»

Содержание DLRO10HD









































Отзывы:

Нет отзывов

Похожие инструкции для DLRO10HD

Бренд: F.W. Bell Страницы: 75

Бренд: Magtrol Страницы: 83

Бренд: Van Walt Страницы: 12

Бренд: Saluki Страницы: 312

Бренд: Lake Shore Cryotronics Страницы: 97

Бренд: DAKOTA ULTRASONICS Страницы: 38

Instrument Control System

Бренд: Opus-Two Страницы: 8

Бренд: ETI Страницы: 2

Бренд: Environmental Express Страницы: 40

Бренд: Toro Страницы: 60

Stream Line Pro

Бренд: Halo Photonics Страницы: 45

Stubby LED-1500

Бренд: Dive Perfect Страницы: 4

Бренд: Michell Instruments Страницы: 28

Бренд: 3nh Страницы: 39

Бренд: Hanna Instruments Страницы: 12

Proline Promag 50H

Бренд: Endress+Hauser Страницы: 52

Бренд: Vanguard Instruments Страницы: 85

Panel Scope VPS10

Бренд: Velleman Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды