Megger DLRO10HD, Руководство пользователя

Страница: 34 / 40

www.megger.com DLRO10HD and DLRO10HDX
30
Repair and Warranty
Repair and Warranty
If the protection of an instrument has been impaired it should not be used, but sent for repair by suitably
trained and qualified personnel. The protection is likely to be impaired if, for example, the instrument shows
visible damage, fails to perform the intended measurements, has been subjected to prolonged storage under
unfavourable conditions, or has been exposed to severe transport stresses.
New instruments are covered by a two year warranty from the date of purchase by the User, the second year
being conditional on the free registration of the product on www.megger.com. You will need to log in, or first
register and then login to register your product. The second year warranty covers faults, but not recalibration
of the instrument which is only warranted for one year. Any unauthorised prior repair or adjustment will
automatically invalidate the warranty.
These products contain no User repairable parts and if defective should be returned to your supplier in original
packaging or packed so that it is protected from damage during transit. Damage in transit is not covered by this
warranty and replacement / repair is chargeable.
Megger warrants this instrument to be free from defects in materials and workmanship, where the equipment
is used for its proper purpose. The warranty is limited to making good this instrument (which shall be returned
intact, carriage paid, and on examination shall disclose to their satisfaction to have been defective as claimed).
Any unauthorised prior repair or adjustment will invalidate the warranty. Misuse of the instrument, from
connection to excessive voltages, fitting incorrect fuses, or by other misuse is excluded from the warranty. The
instrument calibration is warranted for one year.
This Warranty does not affect your statutory rights under any applicable law in force, or your contractual rights
arising from a sale and purchase contract for the product. You may assert your rights at your sole discretion.
Calibration, Service and Spare Parts
For service requirements for Megger Instruments contact Megger or your local distributor or authorised repair
centre.
Megger operates fully traceable calibration and repair facilities, to make sure your instrument continues to
provide the high standard of performance and workmanship you expect. These facilities are complemented by
a worldwide network of approved repair and calibration companies to offer excellent in-service care for your
Megger products.
See the back of this User Guide for Megger contact details.
To find your local Authorised Service Centre email Megger on ukrepairs@megger.com and give details of your
location.