5.5 S
ETUP
M
ENU
Two different ways are available for configuring the printer:
•
by the interface (see command ESC “]”)
•
by this setup menu.
Simultaneously pressing the 2 Push-buttons ► (paper feed) and ■ (menu)
activates the Setup Menu. The 'MENU ACTIVATED' message is then printed
and the first group of setup items are printed too...
In order to modify the settings, you must navigate through the different
groups
(1)
, then the different items
(2)
and modify the value
(3)
of the items.
35
MTH-2500, 2700 & 3500 v3.4
(2)
Navigate through the items of a group:
(1)
Navigate through the groups:
Long push on
: saves the modifications and exits the
setup mode.
Then the message
‘MENU
EXITED’
is printed out and a reset of the
printer is then performed.
: displays the
previous group
Short push on
Each group is printed after each
short push on a button.
: enters in the different items
(2)
of
the selected group
: displays the
next group
(3)
Modify the value of an item:
: validates the new selected parameter
and prints this value in double width
for control purpose.
If the updated parameter was a clock item,
the modification is immediately taken in
account otherwise the setup menu has to be
exited before the values are effective.
Short push on
The new selected value is only
printed after a certain inactive time
thus allowing multiple short presses
without printing.
: exits the navigation in the values and
takes you back to the item
(2)
navigation level
: displays the
next value
Long push on
: displays the
previous value
: displays the
previous item
: enters the item value
(3)
selection
mode for the selected item
Each item and its associated value is
printed after each short push on a
button.
Long push on
: exits the navigation in the items
and comes back in the group
(1)
navigation level
Short push on
: displays the
next item
