4.3.4 V
ERTICAL
S
PACES
·
LF
(0A Hex = 10 Dec)
Starting a new line.
The LF (Line Feed) and CR (Carriage Return) characters act the same
way by triggering the printing of the current line. Some word processing
softwares use LF, others CR and a few others both commands to trigger a
line printing. In order to avoid non required double interline spacing, in
case a sequence including these two consecutive characters is received,
only the first character received will trigger the printing, the other one will
be ignored.
·
FF
(0C Hex = 12 Dec)
In normal mode, starts a new page. See ESC C command.
In label mode, moves the roll at the beginning of the next label.
See GS P n command.
·
CR
(0D Hex = 13 Dec)
Carriage return.
Starting a new line. See LF command above.
·
ESC ) n
(1B 29 Hex = 27 41 Dec)
Advancing for n character lines
·
ESC 2
(1B 32 Hex = 27 50 Dec)
Return to the default space between the lines. (default value = 0)
·
ESC 3 n
(1B 33 Hex = 27 51 Dec)
Setting the space between two character lines to n dot lines
(n x 0.125 mm)
·
ESC 5 n
(1B 35 Hex = 27 53 Dec)
No effect
(only for compatibility with previous software versions)
·
ESC C n
(1B 43 Hex = 27 67 Dec)
Setting the page length in lines of characters.
The default value is set by the setup menu.
·
ESC J n
(1B 4A Hex = 27 74 Dec)
Advancing for n dot lines (n x 0.125 mm).
MTH-2500, 2700 & 3500 v3.4
18
