4.3.2 C
HARACTERS
E
NRICHMENT
·
SO
(0E Hex = 14 Dec)
Double width of characters
·
DC4
(14 Hex = 20 Dec)
Simple width of characters
·
ESC - n
(1B 2D Hex = 27 45 Dec)
Beginning / End of underline
n = 1 (01 Hex) or '1' (31 Hex) Beginning of underline
n = 0 (00 Hex) or '0' (30 Hex) End of underline
·
ESC W n
(1B 57 Hex = 27 87 Dec)
Widening of the characters
The default value of n is 0 (normal size).
The maximum value depends on the actual font size and the margins :
MATRIX
n MAX.
ENLARGEMENT
16 x 24
23
24 times
12 x 24
31
32 times
9 x 24
41
42 times
If n is too big, widening is set to the maximal possible width.
·
ESC o n
(1B 6F Hex = 27 111 Dec)
Graphic design of the zero
n = 1 (01 Hex) or '1' (31 Hex) Slashed zero (default value).
n = 0 (00 Hex) or '0' (30 Hex) Non slashed zero.
·
ESC w n
(1B 77 Hex = 27 119 Dec)
Lengthening of the characters
The default value of n is 0 (normal size).
The maximum value of n is 9 (10 x the normal height)
·
ESC
l
n
(1B 6C Hex = 27 108 Dec)
Setting the left margin in mm.
The byte n represents the distance in millimeters from the left edge of the
printing zone. This setting is independant from the text or data printing
modes. Be careful, right and left margins only affect text printing, and do
not affect graphic and bar code printing.
MTH-2500, 2700 & 3500 v3.4
16
