ENGLISH
ENGLISH
02
03
This device has been designed and manufactured to satisfy the international safety stan-
dards. Please read the following safety precautions carefully before operating this device.
Main Supply:
Before operating, please check the units operating voltage is 100~240V AC 50/60Hz.
Overload:
Do not overload a wall outlet, extension cord or adapter, neither use damaged power
cord or touch it with wet hand as this may result in electric shock.
Liquid:
The receiver shall not be exposed to dripping or splashing water, and that no objects
filled with liquids, such as base, shall be placed on the apparatus.
Ventilation:
Keep the slots on top of the receiver uncover to allow sufficient airflow to the unit. Do
not put the device on soft furnishings or carpets. Do not expose the receiver to direct
light or do not place it near a heater or in humid conditions. Do not stack other electronic
equipments on top of the device.
Risk of suffocation:
Do not let children play with films or other packaging components, there is a risk of
suffocation.
Cleaning:
Plug out the receiver from the wall outlet before cleaning. Clean the receiver by a soft
cloth or mild solution of washing-up liquid (no solvents).
Location:
Put the device indoor in order to avoid lightening, raining or sunlight.
Uncover:
Do not remove the cover, to reduce the risk of electric shock. Contact qualified and li-
censed service personnel to repair the device, or contact your dealer.
Table of Contents
Safety Instructions
1. Safety Instructions
.......................................................................03
2. Introduction
......................................................................................04
3. Packing content
.............................................................................04
4. Overview
Transmitter .........................................................................................05
Receiver ................................................................................................06
Remote control ................................................................................07
5. Installation
Step 1: Setup the Transmitter .................................................08
Step 2: Setup the Receiver ........................................................09
Step 3: Setup the Blaster and IR Sensor ............................10
Step 4: Boot up the Transmitter and Receiver ..............11
Step 5: Mounting the devices to the wall .......................15
4. Troubleshooting
............................................................................16
5. Supported Resolution
..............................................................17
6. Audio Bitrate Resolution
........................................................18
7. Specifications
...................................................................................18
