RS-232
SD CARD
RECEIVER
ANTENNA
IN
DC 12~24 V
OUT
SATELLITE
SELECT
SLEEP
POWER
SATELLITE
SELECT
SLEEP
OFF
ON
06
07
ENGLISH
ENGLISH
2.2 The contron unit
2.3 Selecting the location
2. Installation
2. Installation
Warning:
Connect the device only at a 7 amp protected line.
The line must be at least 2.5 mm² strong. (never directly to the car battery).
Intput
power
supply
Output
power
supply
Connector
antenna
Connector
set-top box
Connector
service
SD Card Slot
Rear view of the control unit
Front view of the control unit
Satellite Select
(up/down)
Interrupt
tracking
LCD Display
On / Off switsch
Direct Broadcast Service (DBS) satellites broadcast audio, video and data information
from satellites located 22 miles in space. A receiving station, such as the antenna, should
include a dish and satellite receiver to receive the signals and process them for use by
the consumer audio and video equipment. The system requires a clear view of the satel-
lite to maximize the signal reception.
Objects such as tall lighthouse, bridges and big ship that block this view will cause a loss
of signal. The signal will be quickly restored once the antenna has a clear line of sight
again. Heavy rain, cloud, snow or ice may also interfere with the signal reception quality.
If the satellite signal is lost due to blockage or severe weather condition, services from
the receiver will be lost (picture will freeze frame and may disappear). When the satellite
signal strength is again high enough, then the receiver will resume providing desired
programming services.
good reception signal
bad reception signal