Change to „DVB-T“ with the SOURCE button
and confirm with OK.
You can now choose between „Import Stan-
dard Channel“ and „Satellite Scan“.
If you select „Import Standard Channel“, the
factory pre-installed channel list is loaded.
This may take a few seconds. The device will
then restart automatically.
If you select „Satellite Scan“, you can select
any satellite and search for channels (see 6.3).
1. Country
Select the country you are located in
(e.g. Germany)
2. Digital auto search
Select „Digital Auto Search“ to start an automatic search.
3. Digital Manual Search
Select „Manual Search“ to search for programs manually. Enter the channel number, frequency
and bandwidth. Then select „Start Scan“ to start the search.
4. LCN
The option „LCN“ is an automatic transmitter sorting. After a successful search, the found
channels are automatically sorted in the channel list (depending on the provider‘s settings).
Note
: The LCN option is not available in every region.
5. Antenna 5V
If you use a DVB-T antenna, the 5V voltage is switched on or off here.
ON = For active DVB-T antenna without separate power supply.
OFF = For active DVB-T antenna with separate power supply or a passive DVB-T antenna.
11
ENGLISH
5. Initial installation
5.4 Reception via DVB-T (terrestrial antenna)
5.3 Reception via DVB-S (satellite television)
Note:
Make sure that the DVB-T antenna is pro
-
perly connected to the TV.
Note:
During operation, you can press the OK button on the remote control to enter the pre-installed
channel list.
Содержание Royal Line 2 Smart 19
Страница 1: ...Bedienungsanleitung Royal Line II Smart 19 22 24...
Страница 31: ...31 DEUTSCH...
Страница 33: ...user manual Royal Line II Smart 19 22 24...
Страница 63: ...31 ENGLISH...