• Press key to modify the biggest PWR value.
• Press key to change frequency of scr.
• Press key to modify the biggest PWR value.
• Press key to change centre frequency.
• Press F1 key to change the bandwidth.
• Press F2 key to change Polar.
• Press F3 key to change 22k tone.
• Press F4 Key to scan local frequency, if the signal is locked, will scan TP.
ENGLISH
ENGLISH
12
13
3.2.1 Satellite
Press key into the satellite list. Use key to move the cursor, then press OK key
to select the satellite that you want.
3.2.2 LNB type
Press key, you can select single/universal/unicable etc, according to your physical
LNB type.
3.2.3 LOW FREQ / HIGH FREQ
Enter the proper LNB frequency referring to your LNB using the numeric keys or pres-
sing key.
3.2.4 Pol
Vertical or Horizontal polarization
3.2.5 Center Freq
Input the value by using the numeric keys.
3.2.6 Bandwidth
Press key to change showing of the bandwidth.
3.2.7 LNB 22KHZ
22 KHz control is automatically set for each LNB alternative.
3.2.8 DisEqc type Input
Press key to set the port type or number, which get the RF signal from the LNB, if
the LNB is connected to DiSEqC switching box.
3.2.9 UnicableSCR
In “3.2.2 LNB type”, if you select UnicableSCR, spectrum will check the SCR frequency.
Press key to select keep or Reset.
Keep: Don’t send SCR dictate. In the spectrum you can check the work status of the
current SCR
Reset: the SCR passage will re- establish. In the spectrum you can check the centre
frequency of SCR.
3.2.0.1 Analyzer
After completing a constitution, press the ok key into Spectrum
In “3.2.2 LNB type”, if you select UnicableSCR, press the ok key into Spectrum
3.2.0.2 Analyzer OF UnicableSCR
