ENGLISH
ENGLISH
06
07
No.
Description
Function
1
LNB IN
Connect to satellite antenna cable
2
AV OUT
Connect to AV port for TV
3
AV IN
Connect to AV port for meter
4
Power switch
Turn on/off meter
5
USB Port
Connect to USB memory
6
DC Slot
Connect to Adaptor Input
7
Torch LED
Night lighting
8
Speaker
Speaker Integrated
9
LCD Screen
Video display
10
Power
Power indicator light
11
22KHZ
22Khz indicator light
12
13V/18v
Vertical /Horizontal polarization voltage output light
13
LOCK
Signal lock indicator light
14
Charger (Note1)
Charger indicator light
15
F1(Note 2)
Shows the Subtitle menu ;TV/Radio switch
16
F2
Shows the EPG menu
17
F3(Note 3)
Shows the Favorite Manager menu
18
F4
Shows Manager Channel menu
19
INFO
To display channel status or various program information of current channel
20
MENU
Show the main menu on the screen or jump back to previous menu in
sub-menu setting conditions
21
Control the torch on/off
22
NEVIGATION KEY
Volume Control or move cursor, channel or change, confirm etc
23
EXIT
Escape from present menu and save the settings
24
0-9
Select channels or enter programming
25
MUTE
Enable or disable the audio output
26
SCAN
‘Quick Search’ menu shortcut key
27
When power on the meter ,displays the battery level
• 4.3 Inch High Definition TFT LCD Screen
• Fully DVB-S/DVB-S2, MPEG-2/MPEG4
compliant
• MPEG-2 / H.264 Hardware decoding
• Constellation analyzer
• Spectrum analyzer
• Digital meter for signal strength and
quality
• Supports scan of Auto ,Blind, Manual
or NIT
• Sound and Light Alarm for Locking
Signal
• Auto Calculate Angle of AZ ,EL
• Supports DISEQC 1.0/1.1/1.2 ,22khz
Tone
• Speaker Integrated
• Support both AV out and AV in
• LNB short protect
• 8.4V/3000mAh Lion Battery Included
• Software upgrade via USB port
• Easy to carry
• Search
• Spectrum
• Constellation
• SatManage
• Multimedia
• System
If you have installed and connected the cables to the meter, pressing MENU key to
display the Main Menu.
Press the keys of to move
the cursor up or down in the menu
interface, then use OK key to
confirm a selection.
1.4 Installation of meter
2. Outline
3. The menu OSD instruction
