43
Setup - Network Setup
HTTP Action
1
General Setting -
Enable or disable the camera to send out an HTTP action when an event occurs. When
enabled, the camera can notify a monitoring software using the HTTP protocol.
2
Account information -
Set the RTSP time out.
Description: Enter a short description to be
HTTP Action Server: Enter the HTTP address of the receiving server. This is the server that will receive the
HTTP action notification from the camera.
PORT: Enter the port number for the receiving server.
User ID: Enter the user ID information for the receiving server.
Password: Enter the password information for the receiving server.
3
Message -
Enter the default message that will be included with the alert.
4
Click ‘Apply’ to make the above setting effective.
Click this button when completing the setup of each channel.
2
1
3
4
