
5
Cooling/Heating operation mode
1. Press the MODE button, select the Cooling or Heating operation mode.
2. Press the “ ” or “ ” button, set the temperature, temperature can be set at 1°C difference range
from 16-32°C.
3. Press the SPEED button, you can select fan speed. You can select fan speed from LOW, MID or
HIGH. (Functions only in cooling mode)
4. Press the ON/OFF button, the operation indicator is on, the air conditioner starts to operate the
automatic mode. Press the button again, the air conditioner stops.
Fan operation mode
1. Press the MODE button, select the Cooling or Heating operation mode.
2. Press the SPEED button, you can select fan speed. You can select fan speed from LOW, MID or
HIGH.
3. Press the ON/OFF button, the operation indicator is on, the air conditioner starts to operate the
automatic mode. Press the button again, the air conditioner stops.
Remark: In the fan operation mode, to set the temperature is noneffective.
Drying operation mode
1. Press the MODE button, select the Dry operation mode.
2. Press the “ ” or “ ” button, set the temperature, temperature can be set at 1°C difference range
from 16-32°C.
3. Press the ON/OFF button, the operation indicator is on, the air conditioner starts to operate the
automatic mode. Press the button again, the air conditioner stops.
Note:
All the figures above are displayed after being initially electrified or re-electrified after power
off. In actual operations, the remote control screen displays related items only.
Attention
1. Aim the remote control towards the receiver on the air conditioner.
2. The remote control should be within 8 meters away from the receiver.
3. No obstacles between the remote control and receiver.
4. Do not drop or throw the remote control.
5. Do not put the remote control under the forceful sunrays or heating facilities or other heating
sources.
6. Use two AAA-batteries.
7. Take the batteries out of remote control before stopping its use for long time.
8. When the noise of transmitting signal can’t be heard on indoor unit or the transmission symbol on
the display screen doesn’t flare, batteries need to be replaced.
9. If reset phenomenon occurs on pressing the button of the remote control, the electric quantity is
deficient and new batteries need to be substituted.
10. Used batteries must be disposed of properly.