3
4. HEATER button
Press this button, you can turn on or off the heater function.
5. SWING 2 button
(not applicable in this model)
Press this button, the vertical wind direction vanes can rotate automatically, when you have the
desired horizontal wind direction, press it again, the vertical wind direction vanes will be stopped at the
situation of your choice.
6. DUST button
(not applicable in this model)
The button is not in use.
7. TIMER button
Setting the ”ON” timer time
a. When remote control is at off state, press TIMER button, the LCD displays ”TIMER ON” and the
timer time, the range of setting time is 0.5h to 24h.
b. You can press the “ ” or “ ” button to adjust the timer time, each touch will be time to increase or
reduce 0.5h before 10hs ago, after ten hours will be set time to increase or reduce 1h per pressing
to enable your required timer.
c. Press TIMER button again to set the timer on function.
d. You can set another function to insure the suitable state after air conditioner turn on (including
mode, temperature, swing, fan speed etc). The LCD will display all your setting and keep it, when
the timer reach to the set timer, air conditioner will be working according to your set automatically.
Setting the ”OFF” timer time
a. When remote control is at on state, press TIMER button, the LCD displays ”TIMER OFF” and the
timer time, the range of setting time is 0.5h to 24h.
b. You can press the “ ” or “ ” button to adjust the timer time, each touch will be time to increase or
reduce 0.5h before 10hs ago, after ten hours will be set time to increase or reduce 1h per pressing
to enable your required timer.
c. Press TIMER button again to set the timer off function.
8. SCREEN button
You can let the LCD display work or not by pressing this button.
9. “ ” or “ ” button
Press the “+” or “-“ button, you can set the temperature range from 16°C to 32°C. Display will change
as you touch the button.
10. CLEAN button
(not applicable in this model)
a. When remote control is at the off state, press CLEAN button, the wind guiding bars turn to initial
positions for cooling, the A/C runs ”clean” function with max duration 35 mins. The purpose of its
function is to clean dust on evaporator and dry the inside water of evaporator and to prevent the
evaporator going moldy due to water deposition and boosting strange smell.
b. After setting ”clean” function, press CLEAN button again to cancel ”clean” function or press
ON/OFF button to cancel ”clean” function and start A/C.
c. The clean function will not be working after 35 minutes running working without any operation.
Note: ”Clean” function can be set in parallel with ”time start” function; in this case, “time start”
function will be executed after “clean” function.
11. MODE button
MODE button enables you to select different operation mode, after each pressing, the operation mode
will be changed. It shows in the following display.
COOL
→
DRY
→
FAN
→
HEAT