
29
OPERATION
Before starting the unit
1.
Select a suitable location, make sure the unit is near to an electrical outlet.
2.
Install the flexible exhaust hose and the adjustable window slider kit.
3.
Plug the unit into a suitable outlet.
4.
Plug one end of the drain pipe into the water full auto-drain outlet and plug the other end plug into the win-
dows installation board.
5.
Turn the unit on.
Heating operation mode
1.
Press the MODE button in a sequence until the heat display is lighted.
2.
Press the ”+” and ”-” button to set your desired temperature.
3.
Press the FAN button to select the fan speed.
4.
Press the ON/OFF button to start the unit and press it again to stop.
Attention: Operationing
the
heating mode, first you need to replace the location of the shutters and the ex-
haust pipe, see chapter ”Duct mounting instructions”.
Cooling operation mode
1.
Press the MODE button in a sequence until the cool display is lighted.
2.
Press the ”+” and ”-” button to set your desired temperature.
3.
Press the FAN button to select the fan speed.
4.
Press the ON/OFF button to start the unit and press it again to stop.
Drying operation mode
1.
Press the MODE button in a sequence until the dry display is lighted.
2.
The fan will run at a fixed speed at this operation mode.
3.
Close windows and doors for the best dehumidifying effect.
4.
Press the ON/OFF button to start the unit and press it again to stop.
Fan operation mode
1.
Press the MODE button in a sequence until the fan display is lighted.
2.
Press the FAN button to select the fan speed.
3.
Press the ON/OFF button to start the unit and press it again to stop.
Timer operation
1.
Press the TIMER button.
2.
Press the ”+” and ”-” button to adjust the timer time.
Note:
”Time off” is effective only when the air conditioner is running.
”Time on” is effective only when the air conditioner is stopped.
WARNING
Failure to follow the below precautions could result in electrical shock, fire or personal injury.
1.
The plug must be plugged into an outlet that is properly installed and grounded.
2.
Do not use an extension cord or plug adaptor with this unit.