![MEGAMO KINETIC Скачать руководство пользователя страница 9](http://html.mh-extra.com/html/megamo/kinetic/kinetic_user-manual_1764969009.webp)
DISPLAY
6.
6.1. INTRODUCCIÓN
El display permite visualizar la información referente al estado de la bicicleta en tiempo real
como la velocidad, el nivel de asistencia, la distancia, el nivel de carga de la bateria, etc.
Detalle de la información mostrada en el panel LCD
:
2
1
8
9
4
5
6
7
3
10
13
14
17
15
16
18
11
12
1.
INDICADOR BATERÍA.
2.
MODO DE CONDUCCIÓN.
3.
ASISTENTE MODO «CAMIN
AR» A 6 K
m/H.
4.
UNIDAD DE VELOCIDAD
5.
VELOCIDAD
6.
DISTANCIA TOTAL.
7.
TIEMPO DE RECORRIDO.
8.
TRIP 2
9.
DISTANCIA.
10.
NIVEL DE ASISTENCIA.
11.
DISTANCIA RESTANTE.
12.
TRIP 1.
13.
ILUMINACIÓN PANTALLA / ALUMBRADO.
14.
NIVEL CARGA BATERÍA.
15.
VOLTAGE BATERÍA.
16.
PORCENTAJE CAPACIDAD BATERÍA.
17.
SEÑAL DE ERROR.
18.
CICLOS DE CARGA BATERÍA.
ESP
9
ENG
36
BATTERY MAINTENANCE
5.
BATTERY
To ensure a correct life, mak
e a first full char
ge of approximately 4 hours. To charge, it is advi-
sable to connect the batter
y first to the char
ger and then to the power outlet
TECHNICAL CHARAC
TERISTICS:
• Lithium type with Samsung batteries
• Voltage, 36V.
• Capacity, 11,6 Ah.
• Num. of charges, 400 to 100%.
• Charging time, 4 to 6 hours.
• Autonomy, 40 to 60 Km. Depending on the use and the level of help used.
PRESERVED
In the case of not using the bicycle, it is recommended to make a full charge at least every 2
months. Otherwise, it is very possible that the battery deteriorates, thus losing the guarantee.
.
Charge the battery after each use, in this way it will ensure a longer life. It should not be char-
ged for more than 6 hours, otherwise the characteristics of the battery or charger may deterio-
rate. Always use the supplied charger.
If the battery does not give a charge signal after charging, make sure all connections are
correct and check that the switch is on. If the problem persists, contact the Partner.
To charge the battery
, first connect the cable to the connector under the pr
otection cap.
Subsequently, connect the charger to the power outlet.
Once the charge is completed, do not forget to protect the connector with the anti-humidity
cap.
The battery is turned on and off by the switch located next to the char-ging connector.
Charge connector without the
anti-humidity cap.
Make sure the connector
always be protected.
Switch on and off.