Fig. 21
16
b). Then with two screws secure the side burner
from underneath to the Side Burner Shelf ().
As shown in Fig.19.
C). Connect ignition wire from Firebox Assembly (H)
control panel to the side burner igniter pin from
underneath the Side Burner Shelf & Control Panel As
Shown in Fig.19.
Noted: the There should be 3mm gap between side burner
Igniter wire and Side burner. Shown in Fig.20.
Fig.19
Side burner
lgniter wire
Side burner
3mm
Fig.20
15. Left Side Shelf Assembly
Repeat Step 10 to assemble Left side Shelf (G).
As shown in fig.21.
H
G
