Fig.13
11. Firebox Assembly
a). Remove the firebox assembly (A) from the
carton and carefully place onto the grill cart. As
shown in Fig. 13.
CAUTION
The firebox assembly is
heavy and will require two or more people to lift
and position onto grill cart. Failure to do so
may result in injury.
Fig.14
b). Attach firebox to the left and right side
panels by using four screws. As shown in
Fig. 14.
12. Side Burner Assembly
a). Loosen the two screws which pre-assembled
onto firebox right side panel (E) but do not
remove Completely. Remove the two screws that
are attached to the main control panel.
b). Align the holes on Side Burner Shelf (H) with the
loosened screws located on the side panel.
c). Secure Side Burner Shelf (H) from inside firebox
using two screws that were removed in step 9a
to attached the Side Burner Shelf (H) to the main
firebox.
d). Secure the Side Burner Shelf Control panel and
main control panel by two screw which are pre-
assembled on the main control panel. As shown
in Fig.15.Tighten all screws.
e). Tighten screws loosened in9b. Ensure all screws
are tight.
Fig.15
A
E
H
