Fig. 7
7. cylinder support bracket Assembly
Mount the cylinder support bracket (AD) onto the
bottom panel (F) using four screws(1) .as show in
Fig. 8.
Fig. 9
8. Door iron piece Assembly
Mount the Door iron piece (AC) on the middle of the
bottom panel (F) using two screws(2) as show in Fig.
9.
6. Wheel Assembly
a). Remove the nuts and washers which are pre-
assembled on the short axle, place the wheels (T) on
the Axle attached to the Cart leg, Front Right (O) and
Cart Leg, Back Right (P),.As shown in Fig.7.
b) Place washers and nuts to the axle and tighten the
nuts.
c) Attached the Wheel caps on both Wheels as
shown in Fig.7
Fig. 8
O
P
T
U
AD
T
AC
F