11
5. Wheel Assembly
a) Remove the nuts and washers which are
pre-assembled on the short axle, place the
wheels (C) on the Axle attached to Cart Leg,
Front Right (I) and Cart Leg, Back Right (J).
As show in Fig. 7.
b) Place washers closest to the wheel and then
place and tighten the nuts on the axle that were
removed in step 5a.
6. Cart Beam Assembly
Insert the Cart Beam (R) into Cart Leg,
Back Left (G) and Cart Leg, Back Right (J),
aligning the holes. The Cart Beam (R)will fit
into holes as shown in Fig. 8. Secure the Cart
Beam by pressing it firmly into the holes of the
Cart Legs.
7. Firebox Assembly
NOTE: We suggest two persons lift the firebox
when assembling. Be sure to remove all
packaging material during assembly.
a) Remove two screws which are pre-assembled
on the Cart Leg Back Right (J) and Cart Leg
Back Left (G). As shown in Fig. 10. A.
b) Remove the four screws that are attached to
cart frame (H). 2 screws on the left and 2 on
the right.
Fig. 8
Fig. 9
A
Fig. 7
G
J
I
C
R
J
8 0
0
7 0 0
6 0
0
5
0 0
4
0 0
3
0 0
2
0 0
1 0
0
